SIGLENT’s SDS5000X series Digital Storage Oscilloscopes are available in bandwidths of 1 GHz, 500 MHz and 350 MHz, have a maximum sample rate of 5 GSa/s, maximum record length of 250 Mpts/ch, and display up to 4 analog
channels + 16 digital channels mixed signal analysis ability.
The SDS5000X series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 110,000 wfm/s (normal mode, up to 480,000 wfm/s in Sequence mode),256-level intensity grading display function plus a color
temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow
for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator, as well as serial decoding are also features of the SDS5000X.
The large 10.1 inch display capacitive touch screen supports multi-touch gestures, with the addition of user-friendly one-button design for most commonly used functions, can greatly improve the operation efficiency of the SDS5000X. It also supports mouse and external keyboard control.
Model | SDS5032X | SDS5034X | SDS5052X | SDS5054X | SDS5102X | SDS5104X |
Bandwidth | 350MHz | 350MHz | 500MHz | 500MHz | 1GHz | 1GHz |
Channel | 2+EXT | 4+EXT | 2+EXT | 4+EXT | 2+EXT | 4+EXT |
Rise time | 1.0 ns | 1.0 ns | 0.7 ns | 0.7 ns | 0.4 ns | 0.4 ns |
Sample Rate (Max.) | 5 GSa/s (interleaving mode), 2.5 GSa/s (non-interleaving mode) | |||||
Memory Depth (Max.) | 250 Mpts/ch (interleaving mode), 125 Mpts/ch (non-interleaving mode) | |||||
Waveform Capture Rate(Max.) | 110,000 wfm/s (normal mode), 480,000 wfm/s (sequence mode) | |||||
Interpolation | sinx/x, x | |||||
History | Up to 100,000 frames | |||||
Vertical Scale (probe 1X) | 1 MΩ: 500μV/div~10V/div(setting range), 1 mV/div~10V/div(specified range) 50 Ω: 500μV/div~1V/div(setting range), 1 mV/div~1V/div(specified range) | |||||
DC Gain Accuracy | ≤ 3.0% | |||||
Offset Range (probe 1X) | 500 μV/div~100 mV/div:±1V 102 mV/div~1 V/div:±10 V 1.02 V/div~10 V/div:±100 V | |||||
Max. Input Voltage | 1 MΩ ≤ 400 Vpk(DC + AC), (DC~10 kHz); 50 Ω ≤ 5 Vrms, ±10 V Peak | |||||
Coupling | DC, AC, GND | |||||
Time Scale | 1 ns/div~1000 s/div | 500 ps/div~1000 s/div | 200 ps/div~1000 s/div | |||
Time Base Accuracy | ±1ppm initial; ±1ppm 1st year aging; ±3.5ppm 10-year aging | |||||
Trigger Mode | Auto, Normal, Single | |||||
Trigger Type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualified | |||||
Serial Trigger and Decode | I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B | |||||
Measurement | ||||||
Source | CH1~CH4, Math, Ref, History, Zoom | |||||
No.of Measurements | Display 5 measurements at the same time | |||||
Range | Screen, Gating | |||||
Measurement Parameters | ||||||
Vertical | Max, Min, Pk-Pk, Top, Base, Amplitude, Mean, Cycle Mean, Stdev, Cycle Stdev, RMS, Cycle RMS, FOV, FPRE, ROV,RPRE, L@T | |||||
Horizontal | Period, Freq, +Width, -Width, Rise, Fall, BWidth, +Duty, -Duty, Delay, T@M, CCJ | |||||
Delay | Phase, FRFR, FRFF, FFFR, FFFF, FRLR, FRLF, FFLR, FFLF, Skew | |||||
Cursors | Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage/ampere Y1, Y2, (Y1-Y2) Track: Time X1, X2, (X1-X2) | |||||
Statistics | Current, Mean, Min, Max, Sdev, Count, Histogram | |||||
Frequency Counter | 7 digits | |||||
Math | +, -, *, /, FFT, d/dt, ∫dt, square root | |||||
Display | 10.1 inch TFT-LCD with capacitive touch screen (1024*600) | |||||
Interface | USB Host,USB Device,LAN,Pass/Fail,Trigger Out,10MHz In,10MHz Out,VGA Output | |||||
Digital Channels (Optional) | 16-channel Max. waveform capture rate up to 1.25 GSa/s; record length up to 62.5 Mpts | |||||
Waveform Generator (optional) | Single channel,frequency up to 25MHz,125MSa/s sample rate, 16kpts waveform memory | |||||
Dimensions | 370mm(D)*144mm(W)*231mm(H) | |||||
Weight | N.W: 3.9 kg(2-ch); 4.0 kg(4-ch); G.W: 5.4 kg(2-ch); 5.6 kg(4-ch) |
Standard Accessories
USB Cable | x1 |
Quick Start | x1 |
Passive Probe | x2 (2-ch model); x4 (4-ch model), SP2035A for 350MHz models and SP3050A for 500MHz / 1GHz models |
Certificate of Calibration | x1 |
Power Cord | x1 |
Optional Accessories
SDS-5000X-4BW05 | 350MHz to 500MHz bandwidth upgrade (4-ch model) |
SDS-5000X-2BW05 | 350MHz to 500MHz bandwidth upgrade (2-ch model) |
SDS-5000X-4BW10 | 500MHz to 1GHz bandwidth upgrade (4-ch model) |
SDS-5000X-2BW10 | 500MHz to 1GHz bandwidth upgrade (2-ch model) |
SDS-5000X-FG | Waveform generator software |
SAG1021I | 25 MHz isolated USB function/arbitrary waveform generator |
SDS-5000X-16LA | 16 digital channels (software) |
SPL2016 | 16-channel logic probe |
SDS-5000X-I2S | I2S trigger & decode |
SDS-5000X-CANFD | CAN FD trigger & decode |
SDS-5000X-FlexRay | FlexRay trigger & decode |
SDS-5000X-1553B | MIL-STD-1553B trigger & decode |
STB3 | STB3 demo signal source |
SAP1000 | 1 GHz active probe |
HPB4010 | High voltage probe |
CP4020/CP4050/CP4070/ CP4070A/ CP5030/ CP5030A/CP5150/CP5500 | Current probe |
DPB4080/DPB5150/ DPB5150A/ DPB5700/ DPB5700A | High voltage differential probe |
*From: |
Enter your email |
*Message: |
Enter your Message |