The SDS1000X-E series employs a new generation of SPO(Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry.It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra.
The new design also includes a hardware co-processor that delivers measurements quickly and accurately.
Record Length of Up to 14 Mpts
Using hardware -based Zoom technologies and record length of up to 14 Mpts, users are able to use a higher sampling rate to capture more of the signal and then quickly zoom in to focus on the area of interest.
Waveform Capture Rate Up to 400,000 wfm/s
With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or low-probability events.
Serial Bus Decoding Function (Standard)
SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format
History Waveforms (History) Mode and Segmented Acquisition (Sequence)
Playback the latest triggered events using the history function. Segmented memory zcquisition will store the waveform into multiple (up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.
Bandwidth:200MHz
Sample Rate:1GSa/s (Single Channel), 500MSa/s (Dual Channel)
Memory Depth (Max.):7 Mpts/CH (Dual-Channel); 14 Mpts/CH (Single-Channel)
Waveform Capture Rate (Max.):100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)
Channel:2+EXT
Vertical Resolution (A/D):8 bit
Vertical Scale(Probe 1X):500μV/div~10 V/div (1~2~5 sequence)
Rise Time (at input, typical):Typical 1.8 ns
Overshoot (500 ps Pulse):<10%
Horizontal Scale (s/div):1.0ns/div~100s/div
Timebase Accuracy:±25 ppm
Display:7 inch TFT-LCD (800*480)
Input Impedance: DC: (1 MΩ±2%) || (18 pF ±2 pF)
DC Coupling:DC, AC, GND
Channel Isolation:DC~ Max BW >40 dB
Max Input Voltage:1 MΩ ≤400 Vpk (DC + Peak AC≤10 kHz)
DC Gain Accuracy:≤±3.0%: 5 mV/div ~10 V/div ; ≤±4.0%: ≤2 mV/div
Probe Attenuator:0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X…… 1000X, 2000X, 5000X, 10000X
Waveform Interpolation:Sinx/x, Linear
Trigger Type:Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video
Trigger Coupling:AC, DC, LFRJ, HFRJ, Noise RJ (CH1~CH2)
Trigger Mode:Auto, Normal, Single
Trigger Accuracy (Typical): Internal: ±0.2 div; EXT: ±0.4 div
Serial Trigger (Standard):I2C, SPI, UART/ RS232, CAN, LIN
Decode Type (Standard):I2C, SPI, UART/ RS232, CAN, LIN
Cursor Measurement:Manual : Time X1, X2, (X1-X2), (1/ΔT) Voltage Y1, Y2, (Y1-Y2); Track: Time X1, X2, (X1-X2)
Automatic Measurement:38 Types
Waveform Math:+ , - , * , / , FFT , d/dt , ∫dt , √
Waveform Storage:80,000 frames(Max.)
Communication Interface:USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Power Supply:100~240 VAC, CAT II, Auto selection
Dimension:312 mm(L)*134mm(W)*150mm(H)
Weight:N.W: 2.5kg; G.W: 3.5kg
*From: |
Enter your email |
*Message: |
Enter your Message |
![]() |