The SDS1000X series employs a new generation of SPO technology.With excellent signal fidelity, background noise is lower than similar products in the industry. The SDS1000X has a minimum vertical input range of 500uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 60,000 frames/sec. It also employs not only the common 256-level intensity grading display function but also a color temperature display mode not found in other models in this class.
The SDS1000X series offering supports multiple powerful triggering modes including serial bus triggering and decoding. History waveform recording and sequential triggering allow for extended waveform records to be captured, stored, and analyzed. Add an impressive array of measurement and math capabilities, options for an integrated 25 MHz arbitrary waveform generator, as well as serial decoding, and the features and high-performance of the SDS1000X oscilloscopes cannot be matched at anywhere at this price.
Ordering Information
Product Description | |
100MHz Two Channels | SDS1102X |
200MHz Two Channels | SDS1202X |
100 MHz Two Channels, Built-In Waveform Generator (Standard), | SDS1102X+ |
200 MHz Two Channels, Built-In Waveform Generator (Standard), | SDS1202X+ |
8 inch TFT-LCD display and 10 one-button menus
SDS1000X Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default Setup, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, Print
Waveform capture rate 60,000 wfms/s
256-level intensity grading and color temperature display
Multiple trigger functions
SDS1000X has a wealth of trigger modes, including edge, slopes, pulse, video, Windows, less amplitude, interval, timeout, pattern, IIC, SPI, UART/RS232, LIN, CAN
Serial bus decoding function (optional)
History Waveforms (History) mode and segmented acquisition (Sequence)
Comprehensive statistical functions
Built-in 25MHz function/arbitrary waveform generator (SDS1000X-S model)
Advanced Math Functions
In addition to the traditional (+, -, *, /) operation, SDS1000X oscilloscopes supports FFT, integration, differentiation, and square root operations
Model | SDS1102X | SDS1202X | SDS1102X+ | SDS1202X+ |
Bandwidth | 100MHz | 200MHz | 100MHz | 200MHz |
Rise time | <3.5ns | <1.8ns | <3.5ns | <1.8ns |
Sample Rate(Max) | 1GSa/s (Single-Channel), 500MSa/s(Dual-Channel) | |||
Channels | Dual | |||
Input Coupling | DC, AC, GND | |||
Input Impedance | DC: (1 MΩ±2%) || (18 pF ±2 pF); 50 Ω: 50 Ω±2% | |||
Max Input Voltage | 1MΩ ≤400Vpk(DC + Peak AC <=10kHz), 50Ω ≤5Vrms | |||
CH to CH Isolation | DC~Max.BW >40dB | |||
Probe Attenuator | 1 X, 10 X, 50 X, 100 X, 500 X , 1000 X | |||
Memory Depth(Max) | Max. 14 Mpts/Ch (Single Channel), 7 Mpts/Ch (Dual Channel) | |||
Vertical Resolution | 8 bit | |||
Vertical Scale (Probe 1X) | 500μV/div~10V/div (1-2-5 ) | |||
Offset Range (Probe 1X) | 500μV~150mV: ± 1V; 152mV~1.5V: ± 10V; 1.52V~10V: ± 100V | |||
Low Frequency Response | ≤10Hz (at input BNC) | |||
DC Gain Accuracy | ≤±3.0%: 5mV/div~10V/div; ≤±4.0%: ≤2mV/div | |||
Time base Scale | 2.0ns/div~50s/div | |||
Time base Accuracy | ±25ppm | |||
Waveform Capture Rate | Up to 60,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) | |||
Channel Skew | <100ps | |||
Display Format | Y-T, X-Y, Roll | |||
Trigger Mode | Auto, Normal, Single | |||
Trigger Type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video | |||
Trigger Coupling | AC , DC, LFRJ, HFRJ , Noise RJ (CH1~CH2) | |||
Trigger Accuracy(Typical) | Internal: ±0.2div; EXT: ±0.4div | |||
Serial Trigger | I2C, SPI, UART/RS232, CAN, LIN | |||
Decode Type(Optional) | I2C, SPI, UART/RS232, CAN, LIN | |||
Automatic Measurement | 37 parameters | |||
Math Function | + , - , * , / , FFT , d/dt , ∫dt , √ | |||
16 Digital Channels | Maximum waveform capture rate up to 500 MSa/s, Record length up to 14 Mpts/CH | |||
Not supported | Not supported | Optional | Optional | |
Logic Probe | SPL1016 (Optional) | |||
Built-in Function Generator ( Standard for SDS1000X+; SDS1000X Not supported ) | ||||
DDS Waveform Generator | Not supported | Not supported | Standard | Standard |
Channel | 1 | |||
Max.Output Frequency | 25MHz | |||
Sample Rate | 125 MSa/s | |||
Frequency Resolution | 1μHz | |||
Frequency Accuracy | ±50 ppm | |||
Vertical Resolution | 14 bits | |||
Waveform Type | Sine, Square, Ramp, Pulse, DC, Noise, Cardiac, Gaus Pulse, Exp Rise, Exp Fall, Arb | |||
Protection | Short-Circuit Protection | |||
General Specification | ||||
I/O | USB Host, USB Device, LAN, Pass/Fail, Trigger Out,1 kHz Cal | |||
Display | 8 inch TFT LCD (800x480) | |||
Dimensions | 340mm(L)*123mm(W)*184mm(H) | |||
Weight | Net weight 3.26 Kg, Gross weight 4.25Kg |
Standard Accessories | |
USB Cable -1 | |
Quick Start-1 | |
Passive Probe-2 | |
Power Cord -1 | |
CD (Included User Manual and EasyScopeX software-1) | |
Optional Accessories | |
I2C,SPI,UART/RS232,CAN,LIN Decoder | SDS-1000X-DC |
16 Channels MSO (Software) | SDS-1000X-LA |
16 Digital Channels Logic Probe | SPL1016 |
Isolated Front End | ISFE |
STB Demo Source | STB |
High Voltage Probe | HPB4010 |
Current Probe | CP4020/CP4050/CP4070/ |
Differential Probe | DPB4080/DPB5150/DPB5150A/ |
*From: |
Enter your email |
*Message: |
Enter your Message |