Siglent SDS1104X-E 100MHz Bandwidth 4 Channel Digital Phosphor Oscilloscope

SDS1000X-E Series Super Phosphor Oscilloscope is available in 100 and 200 MHz bandwidths and 2 or 4 analog channels. It has a maximum sample rate of 1 GSa/s and a standard record length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).

The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Serial decoding is free and includes IIC, SPI, UART, CAN, and LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 Mpt FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of SIGLENT’s new SDS1000X-E cannot be matched anywhere else in this price class.

Record Length of Up to 14 Mpts

Using hardware-based Zoom technologies and record length of up to 14 Mpts, users are able to use a higher sampling rate to capture more of the signal and then quickly zoom in to focus on the area of interest.

Waveform Capture Rate Up to 400,000 wfm/s

With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture low-probability events.

256-Level Intensity Grading

Events that occur more frequently are brighter (intensity grading) than events that occur less often. This allows you to quickly identify spurious signals.

Color Temperature Grading

Event frequency is shown using different colors (temperature grading). Frequent events are warmer the color. This helps to easily identify rare events.

Serial Bus Decoding Function (Standard)

SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in tabular format.

1Mpt FFT

The new math co-processor enables FFT analysis of incoming signals using up to 1M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectral measurement needs.

Bandwidth: 100MHz

Channels: 4CH(16 digital optional)

SamplingRate (Max.): 1GS/s

Memory Depth (Max.): 7 Mpts/CH (not interleave mode);14 Mpts/CH (interleave mode)

Waveform Capture Rate (Max.): 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode)

Waveform interpolation: Sin(x)/x, Linear

Vertical Resolution: 8-bit

Vertical Scale (Probe 1X): 500 μV/div~10 V/div (1-2-5 sequence)

Timebase Scale: 1.0ns/div~100s/div

Timebase Accuracy: ±25 ppm

Trigger Type: Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video

Serial Trigger and decoder (Standard): IIC, SPI, UART/RS232, CAN, LIN

Trigger Coupling: AC,DC,LFRJ,HFRJ,Noise RJ

Trigger Mode: Auto, Normal, Single

16 Digital Channels (four channel series only,option):Maximum waveform capture rate up to 1 GSa/s, Record length up to 14 Mpts/CH

Auto Measurement: 38 Types

Math: + , - , * , / , FFT , d/dt , ∫dt , √

USB AWG module(four channel series only, option): One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts

Bode plot ( four channel series only): Minimum start frequency of 10 Hz, minimum scan bandwith of 500 Hz, maximum scan bandwidth of 120MHz (dependent on Oscilloscope and AWG bandwidth), 500 max. scan frequency points

USB WIFI adapter (four channel series only, option): 802.11b/g/b, WPA-PSK, the adapter must be supplied by Siglent to ensure working

Interface: USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus (Siglent MSO)

Display: 7 inch TFT -LCD (800x480)

Probe (Std): 4 pcs passive probe PP510

Weight: 3.8kg (with package )

SDS1000X-E_DataSheet_DS0101E-E03A.pdf