Products    >    Oscilloscopes  >    4 Channel Oscilloscope  >    DSO4104B
  • 100MHz Bandwidth 1GSa/s Sample Rate 4 Channel Digital Oscilloscope

    Model: DSO4104B

    Features:   

    ●4 channel oscilloscope+EXT+DVM+auto range function

    ●100MHz bandwidth,minimum range 500μV /div,1GS/s sample rate

    ●Over 32 types of auto measurement function

    ●Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc

    ●Decode Type:I2C,SPI,UART,LIN,CAN

    ●Support avariety of SCPI remote control command

    ●Support optional:RS232,LAN,HDMI,touch screen,WIFI and SD card storage

  • Products You May Like
    • Overview
    • Specification
    • Download
    • Send your inquiry
    • 4 channel oscilloscope,100MHz bandwidth, minimum measurement range 500μV /div,1GS/s sample rate, advanced digital trigger system,high trigger sensitivity,low trigger jitter,high resolution 7 inch 64K color TFT LCD.

      Function.jpg

    • Bandwidth:100MHz

      Rise Time (BNC, typical):<3.5ns

      Sample Rate Range:1GS/s

      Channel:4 Channel+EXT

      Input Coupling:DC,AC or GND

      Input Impedance:1MΩ±2%,20pF±3 pF

      Probe Attenuation:1X,10X

      Supported Probe Attenuation Factors:1X,10X,100X,1000X

      Overvoltage Category:300V CAT II

      Maximum Input Voltage:300VRMS (10X)

      Waveform Interpolation:(sin x)/x

      Record Length:Maximum 64K samples per single-channel; Maximum 32K samples per dual-channel (4K, 32K optional)

      Horizontal Scale (s/div):2ns/div~100s/div,1~2~5 sequence

      Sample Rate and Delay Time Accuracy:±50ppm

      Delta Time Measurement Accuracy

      (Full Bandwidth):Single-shot, Normal mode: ±(1 sample interval+100ppm*reading+0.6ns)

                              >16 averages:±(1 sample interval+100ppm*reading + 0.4ns)

                              Sample interval = s/div ÷ 200

      AD Converter:8-bit resolution,each channel sampled simultaneously

      Vertical Scale(Probe 1X):500μV/div~10V/div at input BNC

      Position Range:500μV/div~20mV/div, ±400mV

                             50mV/div~200mV/div, ±2V

                             500mV/div~2V/div, ±40V

                             5V/div~10V/div, ±50V

      Selectable Analog Bandwidth Limit:20MHz(typical)

      Low Frequency Response (-3db):≤10Hz at BNC

      DC Gain Accuracy:±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; 

                           ±4% for Normal or Average acquisition mode, 5mV/div to 500μV/div

      Acquisition Modes:Normal, Peak Detect, Average and HR

      Acquisition Rate(typical):Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement)

      Trigger Mode:Auto, Normal

      Trigger Level;CH1~CH4:±4 divisions from center of screen; EXT:0~3.3V

      Holdoff Range:20ns~10s

      Trigger Level Accuracy:CH1~CH4:0.2div*volts/div within ±4 divisions from center of screen; EXT:± (6% of setting + 40mV) 

      Trigger Type:Edge,Pulse Width,Video,Slope,Overtime,Window,Pattern,Interval,Under Amp

      Decode Type (Standard):I2C,SPI,UART,LIN,CAN

      Cursors:Voltage difference between cursors: △V

                    Time difference between cursors: △T

                    Reciprocal of △T in Hertz (1/ΔT)

      Automatic Measurements:Frequency, Period, Average, Pk-Pk, RMS, PeriodRms, Min, Max, RiseTime, FallTime, + Width, - Width, + Duty, - Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, PeriodAvg, FOVShoot, RPREShoot, BWidth, FRR, FFF, FRF, FFR, LRR, LRF, LFR and LFF

      Display Type:7 inch 64K color TFT 800*480 pixels

      Dimension:318 x 110 x 150mm(L x W x H)

      Weight:2900g

    • DSO4000B.pdf

    • *From:
      Enter your email
      *Message:
      Enter your Message
Corpyright © 2011 Wellzion Electronic Technology CO.,Ltd All Rights Reserved
Contact us
----Tel:+86-592-5562446----
Follow Us On