9kHz~3.2GHz Benchtop Digital Spectrum Analyzer

10 Hz Minimum Resolution Bandwidth (RBW)

Digital IF technology offers a minimum bandwidth of 10Hz,allowing excellent signal resolution when separation of closely spaced signals is required

Measure -130dB small signal at 10Hz RBW

Offers a DANL (displayed average noise level) down to -130 dBm, which is able to measure smaller signals

Phase noise:<-80 dBc/Hz @1GHz @ 30KHz offset

Excellent phase noise performance - <-80dBc/Hz @30KHz enables users to evaluate most synthesizers and signal generators

EMI filter and quasi-peak detector kit

Frequency Specification

Frequency Range:9kHz~3.2GHz

Frequency Resolution:1Hz

Frequency Span Range:0 Hz,100 Hz to maximum frequency of device

Reference Frequency:10.000000 MHz

Temperature Stability:<2.5ppm(15°C to 35°C)

Aging Rate:<1ppm/year

Marker Frequency Resolution:span/(the number of sweep points-1)

Frequency Counter Resolution:1Hz,10Hz,100Hz,1kHz

Resolution Bandwidth (-3 dB):1Hz to 500kHz(in 1 to 10 sequence),1MHz,3MHz

Resolution Filter Shape Factor:<5:1 nominal(Digital implement, similar to Gauss Pattern)

Bandwidth Accuracy:<5% nominal

Video Bandwidth (-3 dB):10Hz to 3MHz

Amplitude Specification

Amplitude Measurement Range:DANL to +20 dBm,close the preamplifier

Reference Electric Level:-80dBm to +30dBm,0.1dBm steps

Preamplifier:20dB,nominal,9kHz~3.2GHz

Input Attenuator Range:0~39 Db,3dB steps

Max. Input DC Voltage:50 VDC

Max. Continuous Power:27dBm,average continuous power

Displayed Average Noise Level(DANL) (Input attenuation 0dB,1Hz resolution bandwidth)

Preamp Off:1MHz~10MHz -140dBm(nominated)

       10 MHz~1GHz -140dBm(nominated)

       1GHz~3.2 GHz -138 dBm(nominated)

Preamp On:1MHz~10 MHz -160dBm(nominated)

       10 MHz~1GHz -160dBm(nominated)

       1GHz~3.2 GHz -158 dBm(nominated)

Phase Noise(20°C ~30°C,fc=1 GHz)

30kHz Offset:<-90 dBc/Hz

100kHz Offset:<-100 dBc/Hz

1MHz Offset:<-110 dBc/Hz

Level Display Range

Log Scale Coordinate:1dB ~255dB

Linear Scale Coordinate:0 to reference level

Level Unit:dBm,dBuW,dBpW,dBmV,dBuV, W,V

Points:201~1001

Number of Traces:5

Detectors:Positive-peak, negative-peak, sample, normal, RMS

Trace Functions:[1 ←→ 2],[2-DL→ 2] [2 ←→ 3] [1 → 3] [2 → 3]

Distortion and Spurious Response

Second Harmonic Distortion (SHI):fc ≥ 50 MHz,Preamp off,signal input -30dBm,0dB RF attenuation,20°C~30°C,-60dbc

Third-Order Intermodulation (TOI):fc ≥ 50 MHz,+13 dBm

1dB Gain Compression:fc ≥ 50 MHz,0dB RF attenuation,Preamp off,20°C ~30°C,+7 dBm, nominal

Residual Response:connect 50 Ω load at input port,0dB input attenuation,20°C~30°C,<-85dBm,nominated

Input Related Spurious:-30 dBm signal at input mixer,20°C ~30°C,<-60 dBc

Sweep Time and Triggering

Sweep Time Range (SPAN>0):10ms~3000s 

Sweep Time Range (SPAN=0):1ms~3000s

Mode:Continue, single

Trigger:Free run, video, external

Tracking Generator

Output Frequency Range:100 kHz~3.2 GHz

Output Power Level Range:-30 dBm~0 dBm

Output Power Level Resolution:1DB

Output Flatness:±3dB

Maximum Safe Reverse Level:Average total power:30dBm,DC:±50VDC

Inputs and Outputs

Front Panel RF Input Connector:50 Ω,N-type female

Front Panel Track Generator Output:50 Ω,N-type female

10M Reference Input:50 Ω,N-type female

Communication Port:USB HOST, USB DEVICE, LAN, Earphone Port and VGA

General Specification

Display:10.4 inches TFT LCD resolution 600*480

Working Temperature:0~40°C

Storage Temperature:-20°C~60°C

Power:100V~240V 50/60Hz

Weight:5kg

XSA1000.pdf