Products    >    Wireless Instruments  >    Cable&Antenna Analyzer  >    E7000A-SA
  • Cable feedline antenna system,spectrum and power measurements analyzer

    Model: E7000A-SA


    ●6.5 inch TFT LCD display

    ●Cable feed line and antenna systems, RF transmission settings and spectrum signal analysis

    ●Trace Overlay enables users to easily detect signal and system degradation over time

    ●2065 Data Points enables users to detect faults

    ●Multiple Display Modes enables users to set the display to lighting condition

    ●Includes over 90 different cable types with the ability to add more

    ●Up to 6-Markers can be set for detailed analysis

    ●USB HOST,mini USB,LAN

  • Products You May Like
    • Overview
    • Specification
    • Download
    • Send your inquiry
    • The E7000A-SA RF Analyzer combines the functionality of cable and antenna system analysis, spectrum analysis and power measurements, covering all measurements required for installation, deployment, maintenance and troubleshooting the physical layer of the wireless base station.

      Designed specifically for wireless communications field engineers and technicians, the E7000A-SA Series RF Analyzers provide of full range of measurement capability to accurately characterize, maintain and troubleshoot wireless communication sites such as return loss, distance-to-fault

      location, tower mounted amplifier gain, antenna-to-antenna isolation, channel power, adjacent channel power, occupied bandwidth and field strength measurements. Interference Analysis function features spectrogram, RSSI, signal identification and location capability.

      Standard Measurements & Applications

      (Cable & Antenna Analysis)

      Fault Location-DFT/RL or DTF/VSWR

      Reflection-Return Loss or VSWR

      Cable Loss

      1-Port Phase

      Smith Chart

      Standard Measurements & Applications

      (Spectrum Analysis)

      Spectrum Analysis

      Channel Power

      Occupied Bandwidth (OBW)

      Adjacent Channel Leakage Ratio (ACLR)

      Field Strength


      Optional Measurement Modes

      High Precision Power Meter (DML-015)

      Interference Analysis (DML-110)

      Coverage Mapping (DML-120)

      Transmission Measurement (DML-025)

      GPS Receiver (DML-999)

    • Cable Analyzer


      Frequency Range (E7000A):1MHz~4.4GHz


      Measurement Speed

      Reflection :<1.0 mS/point

      DTF:<1.25 mS/point

      Data Points :130, 259, 517, 1033, 2065

      Measurement Accuracy

      Corrected Directivity:42 dB (typical, after standard OSL calibration)

                                    38 dB (typical, after eCAL calibration)

      Interference Immunity

      On-channel:+20 dBm @ >1 MHz of carrier frequency

      Off-channel:+13 dBm within ± 10 kHz of carrier frequency


      Return Loss:0 to 60dB

      VSWR:1:1 to 65:1

      DTF Range (Distance):1500 meters (4921 feet)

      Connectors (Reflection/RF Out)

      RF Out:Type N, female, 50Ω

      RF Out Damage Level:25dBm, ± 50 VDC

      Spectrum Analyzer


      Frequency Range:9kHz~3.0GHz

      Tuning Resolution:1Hz

      Aging:<± 1.0ppm/yr

      Frequency Span:1kHz to 3GHz in 1-2-5 sequence (automode),and 0 Hz (zero span)


      Resolution Bandwidth (RBW):10Hz to 3MHz in 1-3 sequence (auto or manually selectable)

      Video Bandwidth (VBW):10Hz to 1MHz in 1-3 sequence (auto or manually selectable)

      Spectral Purity (Phase Noise)

      @ 1kHz Offset from carrier:-85dBc/Hz

      @ 10kHz Offset from carrier:-95dBc/Hz

      @ 100kHz Offset from carrier:-100dBc/Hz


      Dynamic Range:> 95 dB

      Measurement Range:DANL to maximum safe input level

      Maximum Safe Input:+30dBm (peak power, input attenuation > 15dB),50VDC

      Amplitude Accuracy:≤ ± 1.0 dB

      Attenuator Range :0dB to 55dB in 5dB steps

      Displayed Average Noise Level (DANL) (Input terminated,RBW=10kHz, Attn=0dBm, Sample Detector)

      Preamp Off:≤ -142 dBm, typical (1MHz~1GHz)

                       ≤ -138 dBm, typical (1GHz~3GHz)

      Preamp On:≤ -155 dBm, typical (1MHz~1GHz)

                       ≤ -151 dBm, typical (1GHz~3GHz)


      RF In:Type N, female, 50Ω

      RF In Damage:+30dBm, +50VDC


      USB host:Type A, 1-Port (connect flash drive for data transfer)

      USB client :5-pin mini-B (connect to PC for data transfer)

      LAN:10M/100M LAN Port

      Data Storage

      Internal:1GB, > 2000 saved measurement files

      External:Limited by size of USB flash drive

      General Specification

      Display:6.5 inch TFT LCD (640 x 480)

      Battery:Li-Ion, 11.1V, 5.2AH

      European EMC:IEC/EN 61326-1:2006

      Operating Temperature:-10°C to +55°C

      Storage Temperature:-20°C to +75°C

      Shock:Mil-PRF-28800F Class 2


      Weight:2.2 kg

    • E7000A-SA.pdf

    • *From:
      Enter your email
      Enter your Message
Corpyright © 2011 Wellzion Electronic Technology CO.,Ltd All Rights Reserved
Contact us
Follow Us On