SDG6000X is a series of dual-channel Pulse/ Arbitrary Waveform Generators that feature up to 500 MHz bandwidth, a maximum sample rate of 2.4 GSa/s and 16-bit vertical resolution. They also include proprietary TrueArb & EasyPulse technology that help to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms. In addition, the SDG6000X is a multi-function device which can generate Noise, IQ signals and PRBS patterns. These features enable the SDG6000X to provide a variety of high fidelity and low jitter signals, meeting the growing requirements of complex and intensive applications.
Multi-function signal generator, meeting requirements in wide range
Sine | Continuous Wave Generator | Up to 500MHz sine wave, supporting sweep and user-defined harmonics. Low cost replacement of RF signal generators below 500 MHz |
Pulse | Pulse Generator | Up to 150 MHz Pulse, with finely adjustable width, rising edge and falling edge; 3.3 ns minimum width and 1 ns minimum edge at full frequency range |
Arb. | Function Arbitrary Waveform Generator | Basic Function/Arbitrary Waveform Generator and complex signals generating capability including modulation, sweep, burst and waveform combination. |
IQ | IQ Signal Generator (optional) | Base Band and IF IQ signals supporting basic modulation and an arbitrary symbol rate between 250Symb/s ~ 37.5MSymb/s |
Noise | Noise Generator | Up to 500MHz bandwidth White Gaussian Noise with adjustable bandwidth |
PRBS | PRBS Generator | Up to 300Mbps PRBS3 ~ PRBS32 with fine bit rate and edge adjustments |
Up-to 500 MHz Sine Wave
Our highest frequency generator. Novel design delivers higher voltages over a broad range of frequencies.
Adjustable Pulse Edges
The rise/fall times can be set independently to the minimum of 1 ns at any frequency with a minimum adjustment step as small as 100ps.
Point-by-Point Output
TrueArb generates arbitrary waveforms point-by-point. It never skips any point so that it can reconstruct all the details of the waveform, as defined. Two interpolation modes are available: linear and zero-order hold.
IQ Modulation (optional)
The SDG6000X supports popular modulation types such as ASK, FSK, PSK, and QAM. Proprietary resampling technology provides excellent EVM performance at arbitrary symbol rates between 250 Symb/s – 37.5 MSymb/s. Built-in digital quadrature modulator provides the possibility to generate IQ signals from baseband to 500 MHz intermediate frequency.
PRBS
Preset common logic levels such as TTL, LVCMOS, LVPECL and LVDS. An added differential mode provides an easy way to generate differential signals using the both channels.
Waveform:Sine,Square,Ramp,Pulse,Noise,Arbitrary,PRBS,IQ (optional)
Sine:1μHz~500MHz
Pulse:1μHz~150MHz
Square:1μHz~120MHz
Ramp:1μHz~5MHz
Noise:500MHz
Arbitrary:1μHz~50MHz
Resolution:1μHz
Total harmonic distortion(Sine):0.075%
Non-harmonic spurious:-60 dBc(0 dBm, ≤350MHz); -55 dBc (0 dBm, >350MHz)
Waveform length:20Mpts
Sampling rate:300MSa/s, TrueArb mode; 1.2GSa/s, DDS mode
Vertical resolution:16bits
Num. of channels:2
Modulation:AM,FM,PM,FSK,ASK,PSK,PWM
DC Offset:√
Burst:√
Sweep time:1ms~500s
Frequency Counter:100mHz~400MHz
10MHz Input/Output:√
Trigger Input/Output:√
Sync Output:√
Modulation Input:√
Interface:Standard: USB Host, USB Device, LAN; Optional: GPIB (USB-GPIB adaptor)
Display:4.3 inch touch screen display, 480 x 272 x RGB
Dimensions(W*H*D):260.3mm×107.2mm×295.7mm
Net weight :3.5 kg
Gross weight:4.6kg
*From: |
Enter your email |
*Message: |
Enter your Message |