Add to Favorites |
Worldwide
中文 |
Polski | English
 |
AT5130 is a newly designed high-precision, wide-range, multi-channel resistance tester that can scan and test 30 resistors. Controlled by high performance ARM microprocessors. True color 3.5 inches LCD can display 30 resistors at the same time, and each channel can be set separately. AT5130 can test 1μΩ～30KΩ resistors, maximum display is 30,000. At the same time, it also has a standard temperature compensation function, which can adapt to different requirements of the test. Applied to automation equipment, HANDLER interface (PLC interface) is added to output GD/NG signal and RS-232C interface, support SCPI protocol and Modbus protocol (Modbus has become the national standard GB/T19582-2008) applied to automatic sorting system to complete automated assembly production line testing to improve production automation testing capabilities.
Application
Multiple winding transformer DC resistance measurement
Coil DC resistance measurement
Motors Multiple winding resistance measurement
| Channel | 30 channels |
| Parameter | DC resistance |
| Accuracy | 0.05% |
| Measurement Range | 1μΩ~30kΩ |
| Signal Source | Max current:<1A |
| Range | Automatic, manual and nominal range |
| Speed | Slow speed: 10.2s/30 channels Medium speed: 2.49s/30 channels Fast: 1050ms/30 channels High speed: 690ms/30 channels |
| Result Display | 30 channels direct reading display |
| Max Reading | 30,000 |
| Adjustment | Short-circuit clear zero for each range; eliminate the influence of lead resistance. |
| Comparator | The 30 channels are individually set and the instrument can be individually sorted for each channel. Unqualified (CH1-CH30): Low level output, indicating failure NG: All channels fail output. |
| Trigger | Internal trigger; remote trigger; external trigger; manual trigger |
| Display | 3.5 inch TFT LCD display |
| Interface | RS-232C interface (SCPI instruction set), HANDLER interface (PLC interface) |
| Temperature | Accuracy: 0.2°C, temperature range: 0~80°C |
| Method | Four-terminal shield for each channel(including 2 detection element and 2 driving element) |
| Power Supply | Voltage: 198V AC - 240V AC Frequency: 50/60Hz Power: Max 15VA |
| Dimensions | 264(W)mm*107(H)mm*350(D)mm |
| Weight | 4kg |
| *From: |
Enter your email |
| *Message: |
Enter your Message |
 |
