200MHz Bandwidth 1GS/s Sample Rate Digital Oscilloscope

Bandwidth:200MHz

Sample Rate:1GS/s

Rise Time (at input,typical):≤1.7ns

Horizontal Scale (s/div):1ns/div~1000s/div, step by 1~2~5

Vertical Resolution (A/D):8bits

Record length:40M

Waveform Refresh Rate:75,000 wfms/s

Channel:2 + 1 (external)

Display:8 inch color LCD, 800 x 600 pixels (optional 1024 x 768 pixels IPS display)

Input Impedance:50Ω ± 2%, in parallel with 15pF ± 5pF (*, ** 50Ω ± 2%)

Channel Isolation: 50Hz: 100 : 1, 10MHz: 40 : 1

Max Input Voltage:1MΩ ≤ 300Vrms; 50Ω ≤ 5Vrms

DC Gain Accuracy:±3%

DC Accuracy:Average≥16:±(3% reading + 0.05 div) for △V

Probe Attenuation Factor:0.001X~1000X, step by 1~2~5

LF Respond (AC, -3dB):≥5Hz (at input, AC coupling, -3dB)

Sample Rate / Relay Time Accuracy:±1ppm

Interpolation:sin(x) / x

Interval (△T) Accuracy(full bandwidth) :Single: ±(1 interval time + 1ppm x reading + 0.6ns);Average > 16: ±(1 interval time + 1ppm x reading + 0.4ns)

Input Coupling:DC, AC, and GND

Vertical Sensitivity:1mV/div~10V/div (at input)

Trigger Type:Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232 and CAN (optional)

Bus Decoding:I²C, SPI, RS232, and CAN (optional)

Trigger Mode:Auto, Normal, and Single

Vertical Range:±2V ( 1mv/div~50mv/div), ±20V ( 100mv/div~1V/div), ±200V (2V/div~10V/div)

Line / Field Frequency (video):NTSC, PAL and SECAM standard

Cursor Measurement:△V, and △T between cursors, △V and △T between cursors, and auto- cursors

Automatic Measurement:Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edge Count

Waveform Math:＋, －, ×, ÷, FFT

Waveform Storage:100 waveforms

Lissajou's Figure: full bandwidth; Phase Difference: ±3 degrees

Communication Interface:USB host, USB device, USB port for PictBridge, Trig Out (P/F), LAN, and VGA (optional)

Frequency Counter:Support

Power Supply:100V~240V AC, 50/60Hz, CAT II

Power Consumption:＜15W

Fuse:2A, T class, 250V

Battery (optional):3.7V, 13200mAh

Dimension (W x H x D):340 x 177 x 90 mm

Weight:2.60 kg

Multimeter Specifications (optional)

Full Scale Reading:3¾ digits (max 4000 count)

Diode:0V~1.5V

Continuity Test:<50 (±30) beeping

Input Impedance:10MΩ

Capacitance:51.2nF~100uF: ±(3% ± 3 digits)

Voltage    VDC:400mV,4V,400V:±(1±1 digit);max input:DC 1000V

         VAC:4V,40V,400V:±(1±3 digits);max input:AC 750V(virtual value)

Current    DC:40mA,400mA:±(1.5%±1 digit); 10A:±(3%±digits)

         AC:40mA:±(1.5%±3 digits),400mA:±(2%±1 digit),10A:±(3%±3 digits)

Impedance:400Ω: ±(1%±3 digits),4KΩ~40MΩ:±(1%±1 digit)

Frequency:40Hz~400Hz

Arb Waveform Generator Specifications  (optional)

Max Frequency Output:25MHz(125MS/s Sample Rate); 50MHz(250MS/s Sample Rate)

Channel: Available in 1-ch, or 2-ch

Vertical Resolution:14 bits

Amplitude Range:10mVpp~6Vpp

Waveform Length:8k

Standard Waveform:Sine, Square, Pulse, Ramp

Arbitrary Waveform:Exponential Rise, Exponential Fall,Sin(x)/x,Step Wave,Noise and others,total 46 built-in waveforms and user-defined arbitrary waveform

Module / Function (Optional)

VGA:VGA+AV Port

WIF:WiFi

AWG:Arb Waveform Generator

DMM:Digital Multimeter

TOU:Touch Screen (capacitor-type)

Decoding Kit (Optional)

RS232:RS232

SPI:SPI

I²C:I²C

CAN:CAN Trigger / Decoding

XDS3000.pdf